Use the procedure in this section if you want to manually install a VirtaMove Source Agent on each source server.

If you have a large number of servers on which you want to install Source Agents, VirtaMove recommends using V-Maestro to install Source Agents remotely. To install Source Agents remotely using the V-Maestro interface, see Installing Source Agents Remotely Using V-Maestro.

Pre-Requisites

• Ports TCP 137, 139, and 445 must be open to install VirtaMove Source Agent.

• Port 9665 must be open to connect to the VirtaMove Source Agent on the source machine.

Note:
You can verify the integrity of your downloaded software by checking the MD5. See here for more details.

To Install a Source Agent Manually

1. On the machine where you want to install a Source Agent, run one of the following installers:

   • VirtaMoveSourceAgent_x86.msi (for 32-bit servers)

   • VirtaMoveSourceAgent_x64.msi (for 64-bit servers)

2. The installer opens. Accept the license agreement.

3. Select a key. See About SSL Keys for more information.

4. Repeat this procedure for each server where you want to install a Source Agent.